Jarvis Review: Write a Blog Post 5x Faster in 2022

Bash your competitors with AI-assisted quality content.

Artificial intelligence is taking over.

Recently, modern companies have developed AI-based writing tools that revolutionize the way we write for the web.

The most well-known writing tool in 2021 is called . This tool makes it possible to produce original and well-thought content 2–5 times faster than you would normally do. Better yet, this tool is really easy to use.

Today, I’m going to show you how to use the long-form assistant to write a blog post. We are going to build this 500-word article in 10 minutes:

AI-generated, 100% original content. No previous knowledge about the topic is required.

Disclaimer: This post contains affiliate links that I receive a small commission for at no cost to you.

How to Write a Blog Post with

In this guide, we are going to use Jarvis Long-form assistant to write an AI-written blog post.

Make sure you sign up for a free trial for Jarvis Boss Mode using .

Activate the Boss Mode in

To write a blog post with Jarvis, activate the plan. This makes it possible for you to use the long-form assistant to write outstanding blog posts.

The long-form assistant is not included in the Starter mode.

Before getting our hands dirty, let’s make a quick comparison between the Starter mode and the Boss mode.

Starter Mode vs Boss Mode

comes with two modes, the Starter and Boss Mode. The latter is the most popular option because it unlocks all the cool features of Jarvis, such as a long-form content assistant that we are going to use in this guide.

Here is a brief comparison between Starter and Boss Mode.

Starter Mode

With the starter plan, you have access to:

  • 50+ short-form templates.
  • 20 000+ words per month.
  • 600 characters look back. (Jarvis reads the last 600 characters to decide what to write).

You can use a free trial to test the starter plan. After the trial, this plan starts at $29/month.

However, with the Starter plan you do not have access to these useful features:

  • Long-form Assistant
  • Jarvis Commands
  • Recipes

This is where the Boss Mode kicks in.

Boss Mode

The boss mode is the blogger’s go-to choice when using Jarvis.

Boss Mode includes awesome features that the Starter plan does not:

  • Blog post assistant.
  • Generate AI content up to 5x faster.
  • 3000 characters look back.
  • Jarvis Commands tell Jarvis what to write about.
  • Recipes — pre-built Jarvis templates that allow you to skip steps to produce content even faster.
  • Compose Button — Tell Jarvis to continue from where it left without giving any other input.

To follow this guide, you need to access the Boss Mode. Feel free to try it for free.

Outside the free trial, the Boss Mode pricing starts at $59/month.

After activating the Boss Mode, you are ready to start writing blog posts using AI.

Create New Blog Post Workflow

Go to Templates > Long-form assistant > Blog post workflow:

1. Describe the Content You Want to Create

On the Blog post workflow page, you are going to see a step-by-step guide on how to get started with the blog post.

As a first step, describe the content you want to create.

Remember, Jarvis is a writing assistant. It cannot read your thoughts. So you need to give some input to it. This is important because it shows Jarvis what you want to write about.

For example, let’s ask Jarvis to start writing a blog post about search engine optimization (SEO) without any prior knowledge.

To do this, I describe the blog post for Jarvis this way:

“Write a blog post about SEO, that is, search engine optimization. Tell the reader why SEO matters and how it can change traffic on any website.”

(As you can see, you can also specify the number of keywords for the post. We are going to skip this part for now.)

Once you have described your content to Jarvis, click “Continue”.

2. Generate Post Title

Now that you have the content description, let’s generate a title.

You can either use a blog post title of your own, or you can use Jarvis to generate one.

Let’s ask Jarvis for some title ideas by clicking “Generate ideas”.

This takes one or two seconds after which you see a bunch of suggestions.

The third option “Why SEO Matters for Your Business” sounds cool.

To choose it, click “Use this one”.

By the way, if none of the above suggestions look good, feel free to generate more titles by clicking “Generate more ideas”.

Next, let’s choose an intro for the blog post.

3. Blog Post Intro

Now it is time to generate an intro for our article.

To make Jarvis generate intros, click “Generate ideas” in the Intro paragraph section:

(Notice that you can also write your own intro if you wish to.)

Generating intro results in a number of intros suggested by Jarvis.

Meanwhile, all of these suggestions look great, let’s stick to the second one.

And this completes the setup phase of our article.

Click “Open editor” to start generating the actual blog post content.

This opens up the Jarvis editor with the content specified in the setup phase.

The next step is to create a blog post outline.

4. Blog Post Outline Using Jarvis

With the title and introduction in place, let’s write a blog post outline.

If you have a specific outline in mind, feel free to stick with that. If you don’t, you can let Jarvis generate one for you.

To make Jarvis generate the outline, write something like this into the editor:

Write a blog post outline for “Why SEO Matters for Your Business”.

For the next step, make sure your cursor is at the end of the command! This is because Jarvis always generates text where the cursor is.

Now click “Compose” down on the left-hand side and let the magic happen.

For me Jarvis generated the following outline:

  • Introduction
  • Benefits of SEO for Businesses
  • Best practices to increase traffic from Search Engines
  • Conclusion/Call To Action

It is that easy!

Now, before we generate content for each section in the outline, we need to create the conclusion paragraph.

5. Generate Conclusion Before the Actual Content

Before writing out the blog post, let’s write a conclusion.

Similar to the previous steps, you can let Jarvis generate the conclusion.

But why generate a conclusion before writing the post?

Jarvis can only look back so many characters. If we wrote the conclusion for a 10 000 character blog post, Jarvis would only be able to use the last 3000 characters to form the conclusion. This would make our conclusion incomplete.

With this in mind, let’s write a conclusion for our post using Jarvis command.

So easy and so cool!

Now we are ready to jump into producing the actual content for the post.

6. Generate the Blog Post Content

So far you have used Jarvis to generate a nice structure for the blog post. This includes:

  • Title
  • Intro
  • Conclusion

Let’s quickly have a look at the left-hand side of the editor before generating the rest of the post.

The Editor Bar on the Left

Take a look at the left side of the Jarvis editor. There is the content description and the title.

It is important to realize that you can modify anything here at any time during the writing process.

For example, if you write a specific section in your blog post, you can modify the content description to more accurately describe that section.

Another thing worth noticing is the toggles below each box.

If you switch one of these toggles off, Jarvis disregards the content on the box altogether.

However, in this guide, I am not going to touch the toggles or change the content description.

Generate the Blog Post with Jarvis

Finally, let’s generate content for each section in our blog post.

As you remember, Jarvis suggested the following structure for our blog post:

  • Introduction
  • Benefits of SEO for Businesses
  • Best practices to increase traffic from Search Engines
  • Conclusion/Call To Action

We already have Introduction and Conclusion in place, so let’s manually remove the Introduction from the list and add the Conclusion heading where it belongs to.

Here is how the article looks after these small manual tweaks:

Now we have two sections that need to be filled in by Jarvis that form the actual content for the post.

To do this, you can ask Jarvis to write introductory paragraphs for these two subheadings.

For example:

Here we tell Jarvis to write content about the topic in the above subheadings.

The *** operator tells Jarvis to not repeat anything before the three asterisks. This operator is not mandatory, but sometimes it makes Jarvis do a better job.

Tip: Sometimes Jarvis starts to repeat itself. To prevent this, add *** to make it stop.

Anyway, let’s make Jarvis write the content for these sections. To do this, add your cursor at the end of one of the commands and click “Compose”.

Now Jarvis writes an introductory paragraph for our first subheading.

Here is what the result looks like.

If you are pleased with this output, leave it as is.

You may also manually modify the text, generate more content by clicking “Compose” again, or erase the whole section.

Next, let’s go to the second chapter and compose an intro to it:

This time I composed three times to get more content. As you can see it looks pretty good!

Notice you can tell Jarvis to write text in any format, not just regular sentences.

For example, you can ask it to write a bulleted list of important SEO factors:

Wonderful!

This completes the AI-written blog post.

Before publishing the post, let’s make some styling edits.

  • Remove the Jarvis commands and ***’s from the content.
  • Format the post. For example, you can convert header paragraphs to actual headers with the editor.
  • Fix the small grammar errors. To fix these, enable for free or just go through the post quickly yourself.
Grammarly is integrated into Jarvis and helps you spot grammar mistakes.
  • Also, it is highly recommended to add images to any blog post to make it look more appealing. You can add images for free using an image bank such as .

After completing these steps your post is ready to go live!

Here is how the final result of our example post on SEO looks like.

So there you have it! 100% original and search engine-friendly content written by an AI writing assistant.

This post ended up being 500 words in length with only 10 minutes of effort.

7. Publish Your Content

After Jarvis has done all the hard work it is your time to enjoy the benefits by publishing the content.

Moving the post to another platform is easy—copy-paste the content to a platform of your choice.

For example, on Medium, you can start a new story.

And copy-paste the content directly from Jarvis to Medium.

The same goes for WordPress. Create a new post.

Copy-paste the content from the Jarvis editor to your blog post.

This completes the tutorial.

Impressive?

Make sure to try for free!

Summary

Artificial intelligence (AI) is making its way to the blogging business.

You can already use an AI-based writing assistant to boost your performance and productivity.

I believe that in a couple of years not using an AI writing assistant automatically drops you out of the competition.

In 2022 it is a perfect time to jump in on the AI train. As a blogger, the best way to do this is to start using AI-based writing tools.

In this article, you learned how to use to write 100% original, well-thought, and search-engine-friendly content in a matter of minutes.

I hope you enjoy it. Thanks for reading.

Happy writing!

Get Jarvis

Become a Top Writer on Medium?

I’m a tech expert, entrepreneur, and software engineer from Finland. I write about programming, tech, and science. Visit my blog at .